add inter/sgp/hardware/powder_schedule.ev

inter/sgp/hardware/powder_schedule.ev

@@ -0,0 +1,104 @@
+
+
+
+DEBUGVAR LastTimeUseChannel10InMinute
+DEBUGVAR CurrentXMLFileName0
+SAVELOG "powder schedule version 1.05"
+
+DEBUGVAR PowderPayPushLowScheduleTurnOn10
+
+If PowderPayPushLowScheduleTurnOn10 = "1" Then
+    Var PowderPayPushLowScheduleTurnOn10 = 1
+EndIf
+
+If PowderPayPushLowScheduleTurnOn10 = 1 Then
+    If SystemTimeHourInt = 3 Then
+        If SystemTimeMinuteInt = 30 Then
+            ; idle 
+            ; and time match
+            
+            If PowderStatus = "" Then
+                Var PowderStatus = "tricker"
+                Var PowderTestStep = 1
+                
+            EndIf
+        EndIf
+
+        If SystemTimeMinuteInt = 60 Then
+            ; idle 
+            ; and time match
+            
+            Var PowderStatus = "" 
+            Var PowderTestStep = 0
+            SAVELOG "PowderScheduleForCh10 reset reset reset"
+        EndIf
+    EndIf
+EndIf
+
+If PowderTestStep = 1 Then
+    If CurrentXMLFileName0 = "/mnt/sdcard/coffeevending/taobin_project/xml/page_board.xml" Then
+        Var PowderTestStep = 0
+        Var PowderScheduleForCh10 = "start"
+        SAVELOG "PowderScheduleForCh10 start start start"
+    EndIf
+
+EndIf
+DEBUGVAR PowderStatus
+DEBUGVAR PowderTestStep
+
+; setvar PowderScheduleForCh10 start
+
+If PowderScheduleForCh10 = "" Then
+
+Else
+    DEBUGVAR PowderScheduleForCh10
+    DEBUGVAR PowderDriverToLowPositionResult
+
+    If PowderScheduleForCh10 = "start" Then 
+    
+        Var MachinePowderCamTestResult = "hurr"
+        Var PowderScheduleForCh10 = "wait"
+        __CMD "CLI" "check-cam-powder" "-" "-"
+        Var PowderDriverToLowPositionResult = ""
+
+        
+    EndIf
+
+    DEBUGVAR MachinePowderCamTestResult
+  
+    If PowderScheduleForCh10 = "wait" Then
+        
+        DEBUGVAR PowderScheduleForCh10
+        If MachinePowderCamTestResult = "pass" Then
+            Var PowderScheduleForCh10 = "powder-run"
+            Var MachinePowderCamTestResult = ""
+        EndIf
+    EndIf
+
+    If PowderScheduleForCh10 = "powder-run" Then
+        Var PowderScheduleForCh10 = "wait-low-test"
+        __CMD "CLI" "powder-set-channel-for-low-push-stage=10,powder-set-time-for-low-push-stage=8,powder-low-push=xml" "-" "-"
+        DEBUGVAR PowderScheduleForCh10
+        
+    EndIf
+    
+    If PowderScheduleForCh10 = "wait-low-test" Then
+        DEBUGVAR PowderDriverToLowPositionResult
+        If PowderDriverToLowPositionResult = "" Then
+
+        Else
+            If PowderDriverToLowPositionResult = "pass" Then
+                SAVELOG " Powder driver low test channel 10 pass pass pass pass pass pass pass pass pass "
+                Var PowderScheduleForCh10 = ""
+                
+            Else
+                SAVELOG " Powder driver low test channel 10 error "
+                Var PowderScheduleForCh10 = ""
+            EndIf
+            Var PowderDriverToLowPositionResult = ""
+        EndIf
+
+    EndIf
+    
+
+EndIf

inter/tha/hardware/powder_schedule.ev

@@ -3,10 +3,14 @@
 
 DEBUGVAR LastTimeUseChannel10InMinute
 DEBUGVAR CurrentXMLFileName0
-SAVELOG "powder schedule version 1.04"
+SAVELOG "powder schedule version 1.05"
 
 DEBUGVAR PowderPayPushLowScheduleTurnOn10
 
+If PowderPayPushLowScheduleTurnOn10 = "1" Then
+    Var PowderPayPushLowScheduleTurnOn10 = 1
+EndIf
+
 If PowderPayPushLowScheduleTurnOn10 = 1 Then
     If SystemTimeHourInt = 3 Then
         If SystemTimeMinuteInt = 30 Then

inter/tha/menu/lang.tsv

@@ -1091,7 +1091,7 @@
 1300016		Brew time:sec	เวลาชง: วินาที
 1300017		Test grind sizes	ทดสอบขนาดบด
 1300018		Coffee module type :	ประเภทชุดกาแฟ :
-1300019		1. Select grind sizes	1. เลือกขนาดการบด
+1300019		1. Select grind sizes	1. เลือกขนาดบด
 1300020		More coarse	หยาบขึ้น
 1300021		More fine	ละเอียดขึ้น
 1300022		2. Test grinding	2. ทดสอบการบด